Category
Help
Search
HomeFuel PumpSR4 generator / SR4 generator part 6N0205 pump gp-fuel injection

SR4 generator / SR4 generator part 6N0205 pump gp-fuel injection

CategoryFuel Pump
Product NO.6N-0205 pump gp-fuel injection
SectionFuel System And Governor
For ModelSR4 Generator(5CA) / D333C Industrial Engine(66D)
description
Product description
Fuel Pump
Specifition for 6N0205 PUMP GP-FUEL INJECTION assembly:
Assembly Part NO.: 6N0205 PUMP GP-FUEL INJECTION
Media Title: 3306 INDUSTRIAL ENGINE
Section: Fuel System And Governor
For Model: SR4 Generator (5CA), SR4 Generator (5DA), SR4 Generator (5EA), SR4 Generator (5FA), 3306 Industrial Engine (66D), D333C Industrial Engine (66D), SR4 Generator (5CA), SR4 Generator (5DA), SR4 Generator (5EA), SR4 Generator (5FA)
Ref Part Number Name Qty NPR Note
- 4N0572 SHAFT AS-CONTROL 1 Y -
- 6N1347 HOUSING AS-PUMP 1 Y -
- 4N1826 DOWEL 1 Y -
- 2D6392 SEAL 6.07 mm(.239 in.) diameter 1 Y SMALL
- 1P2298 VALVE ASSEM. 1 Y FUEL CHECK
- 6N5325 PIN-SPRING 6 Y -
- 4N5481 STUD 1 Y -
- 4N2333 PIN (spring) 1 Y DOWEL
- 5M6509 SEAL O RING 1 Y 66.34MM ID
- 4N0406 GEAR (10 teeth) 1 Y 10 TEETH
- 9L6863 BODY AS-TRANSFER PUMP 1 Y -
- 4N5050 PLUG 1 Y -
- 8H9804 SHAFT-PUMP IDLER 1 Y -
- 4N0636 SEAL LIP TYPE 1 Y SMALL
- 4N1584 SEAL LIP TYPE 1 Y LARGE
- 8S6814 DOWEL 12.7MM(.5 IN.) LONG 1 Y 12.7MM .5IN LG
- 5J5314 BOLT 4 Y LG; 1.50 IN; 38.1MM
- 4N2954 SLEEVE-CAMSHAFT 1 Y -
- 4N3779 KEY-CAMSHAFT 1 Y -
- 4N0429 GEAR (15 teeth) 1 Y 15 TEETH
- 1P4001 FITTING 1 Y -
- 4N4313 CAMSHAFT-FUEL PUMP 1 Y -
- 4N0528 SHAFT-LEVER 1 Y -
- 4N0508 GASKET--(TORQUE SPRING COVER) 1 Y GASKET; TORQUE SPRING COVER
- 2M5471 BOLT 1.75 in. (4.44 cm) long 2 Y -
- 4N1591 COVER AS-SPRING HOUSING 1 Y -
- 4N0506 COVER-TORQUE SPRING 1 Y -
- 4N1594 MACHINE SCREW 1 Y -
- 4B2042 NUT 1 N 8-32-THD
- 3B4501 LOCKWASHER 1MM (.040 IN.) THICK 1 N LARGE
- 1P7326 WASHER -1.53 mm(.06 in.) thick 1 Y THICK
- 8F1326 WASHER .8128 mm (.0320 in.)thick 1 N THIN
- 2P3200 BOLT TUBE ASSEMBLY TO PLATE .75 IN. (19.0 MM) 1 Y BOLT-TUBE AS TO PLATE-.75 IN.
- 1J9671 SEAL 10.5MM(.414IN.)I.D. 1 Y SEAL-O-RING
- 3H0442 SEAL--RISER LEVER SHAFT 1 Y SEAL-RISER LEVER SHAFT
- 2N2658 BOLT-SOCKET HEAD 6 Y BOLT
- 4N1763 LEVER-CONTROL 6 Y -
- 4N0209 BONNET-VALVE 6 Y -
- 4N0218 BUSHING-TERMINAL 6 Y -
- 4N2655 VALVE-CHECK 6 Y -
- 9L9424 SPRING-VALVE 6 Y -
- 4N0224 RING-RETAINING 6 Y -
- 4N1765 PLUNGER & BARREL ASSEM. 6 Y BARREL
- 4N4318 SPRING-LIFTER 6 Y -
- 4N2728 WASHER-RETAINING 6 Y -
- 4N2685 ROLLER-LIFTER 6 Y -
- 4N1750 LIFTER-PLUNGER 6 Y -
- 4N0605 SPRING 1 Y -
- 4N1767 VALVE-BYPASS 1 Y SERVO OIL PUMP
- 4N0223 SEAL-RING 6 Y -
- 8N1570 HOUSING AS-PUMP 1 Y -
- 7E5346 VALVE AS 1 Y FUEL FILTER
- 8N0984 PIN-SPRING 6 Y 3.8 OD X 17.5MM LG
- 8N0628 BEARING 1 Y SLEEVE
- 5P4810 BEARING 1 Y -
- 6N7527 PUMP ASSEMBLY--FUEL INJECTION 6 Y PUMP ASSEMBLY-FUEL INJECTION
- 9N5862 SPRING-LIFTER 1 Y -
- 7W8120 BUSHING-TERMINAL 6 Y -
- 6F6672 SEAL (.674" Inside Diameter) 6 Y 17.12MM ID
- 8N1317 LIFTER-PLUNGER 6 Y -
IESCN: SEBP12000652
6N205 FUEL INJECTION PUMP GROUP-PART 2-TYPE 2 PART OF 6N172 FUEL INJECTION PUMP AND GOVERNOR DRIVE GROUP SHOWN ON PAGE 216. AN ATTACHMENT.
Assembly 6N-0205 PUMP GP-FUEL INJECTION is avaliable for 5CA SR4 Generator, but actual situation depends on your really model / equipemt, if you have any questions about 6N0205 will be correctly installed or not, please contact our online tech-support.
About
Reference: 6N-0205 Fuel Pump also avaliable for these model / assembly:
  • SR4 Generator (5CA) Fuel System And Governor 6N0172 PUMP GP-FUEL INJECTION
    6N172 PUMP GP-FUEL INJECTION 7N2595-PAGE 218, 6N205-PAGE 220 AN ATTACHMENT
The above list means 6N0205 Fuel Pump suitable for these model / assembly, items are listed in the reference list according to the parts EPC , any issue please contact our online tech-support.
description1
description2
WhatsApp Skype
Copyright © 2023 Fuel-Injector-Pump.com All Rights Reserved.