Assembly  7N2520 fuel pump for 3408 engine machine / 3408C engine machine

Assembly 7N2520 fuel pump for 3408 engine machine / 3408C engine machine

CategoryFuel Pump
OEM NO.7N-2520 fuel injection pump group
SectionFuel System And Governor
For Model3408 Engine Machine(48W) / 988B Wheel Loader(50W)
Fuel Pump

Specifition for 7N2520 Fuel Pump assembly:

Assembly Part NO.:
7N2520 FUEL INJECTION PUMP GROUP

Media Title:
988B WHEEL LOADER 3408 ENGINE

Section:
Fuel System And Governor

For Model:
3408 Engine Machine (48W), 3408C Engine Machine (48W), 3408E Engine Machine (48W), 988B Wheel Loader (50W)

Ref Part Number Name Qty NPR Note
- 4N1636 GASKET 1 Y -
- 3J1907 SEAL TO PLUG ON VALVE ASSEMBLY & PLUGS ON MANIFOLD ASSEMBLY 1 N --TO ADAPTER
- 4B4158 SCREW (IDENTIFICATION PLATE) MOUNTING 2 N 3/16X0.25-IN
- 3D2824 SEAL 23.47 mm(.924 in.) I.D. 2 N O.D.; 1.04IN; 26.5MM
- 4N0901 RACK-REGULATING LH 1 Y -
- 2M4208 SPACER .1740 in. (4.42 mm) thick 8 N .174IN; 4.42MM; THK
- 2M4209 SPACER .1780 in. (4.52 mm) thick 8 N .178IN; 4.52MM; THK
- 2M4210 SPACER .1820 in. (4.62 mm) thick 8 N .182IN; 4.62MM; THK
- 4M4211 SPACER .186 in. (4.72 mm) thick 8 N -
- 2M4212 SPACER .1900 in. (4.83 mm) thick 8 N 4.83MM; THK; .190IN
- 5M2691 SPACER .1940 in. (4.93 mm) thick 8 N 4.93MM; THK; .194IN
- 5S7189 SPACER .1980 in. (5.03 mm) thick 8 N .198IN; THK; 5.03MM
- 7L8696 SPRING-BYPASS 1 Y -
- 8H3127 BOLT 2 Y 1/4-20X3/4 IN
1 4N1634 COVER 1 Y -
1 4N0824 VALVE AS-BYPASS 1 Y FUEL INJECTION PUMP
2 2A0762 BOLT 15.87mm(.625 in.)long 2 N 6.35MM; DIA.; .25IN
2 3K0360 SEAL-O-RING (FOR 9G1300 SWITCH) 1 N .644IN; ID; 16.36MM
3 9S4191 PLUG 14.28 mm(.5265 in.) thread 1 N PLUG TO WINCH CASE
3 2S2821 GEAR (10 teeth) 1 Y -
4 6N2075 PLATE 1 N -
4 4N0971 COVER 1 Y -
5 8H9204 WASHER FELT 8 N 19/32X7/8X5/16-IN THK
5 6N4165 PINION AS-GOVERNOR DRIVE 1 Y 12-TEETH
6 2M4314 BUSHING 8 N -
6 6N4090 DOWEL 1 Y -
7 9S8008 PLUG-O-RING (1 1/16-12 THD) 2 N 1-1/16-12-THD; WATER LINES GROUP
7 3S6514 GEAR (10 teeth) 1 Y -
8 1T0284 BOLT-SOCKET HEAD 1 Y 5/16-18X1-IN
8 6N6926 SPRING 1 Y -
9 6N6964 BRACKET ASSEM. 1 Y -
9 4N0906 SHAFT 1 Y -
10 6N6955 PIN 1 Y -
10 1S7984 BEARING-SLEEVE 1 Y -
11 6N6963 SPRING 1 Y -
11 7N2514 LEVER 1 Y -
12 4N1572 LINK-RACK 1 Y -
12 0310215 BOLT 5T7453 CABLE AS TO 5T0018 LEVER 2 Y 1/4-20X0.625-IN
13 4N0900 RACK-REGULATING RH 1 Y -
13 4N0907 LEVER-SHUT-OFF 1 Y -
14 1M1077 SEAL 8 N SEAL
14 4N0905 GEAR (Bevel - 42 teeth) 1 Y 42-TEETH
15 6N1043 PUMP GROUP FUEL INJECTION (P.C.) 8 Y PUMP GROUP FUEL INJECTION
15 4N0776 RETAINER 1 Y -
16 5M2697 SPACER .1700 in. (4.32 mm) thick 8 N 4.32MM; THK; .170IN
16 0S1618 BOLT .795 cm(.313 in.) O.D. 3 N 5/16-18X1 IN
17 4N0779 HOUSING AS-PUMP 1 Y -
17 5M6214 PIPE PLUG--CYLINDER BLOCK OIL PRESSURE 1 N MTD IN
18 3S9736 LIFTER ASSEM. 8 N -
18 5F9144 SEAL 7.65 mm(.301 in.) I. D. 1 Y 7.65MM ID
19 4N0599 CAMSHAFT 1 Y -











BILDID: c227624
IESCN: SEBP10790204
7N2520 FUEL INJECTION PUMP GROUP--End View--Part 2 of 2 Engine Serial No. 48W1 to 48W1195 inclusive Part of 6N1676 Governor and Fuel Injection Pump Group shown on Page 54
Spare part 7N-2520 FUEL INJECTION PUMP GROUP is avaliable for 48W 3408 Engine Machine, but actual situation depends on your really model / equipemt, if you have any questions about 7N2520 will be correctly installed or not, please contact our online tech-support.

About

Reference Source: 7N-2520 FUEL INJECTION PUMP GROUP also avaliable for these model / assembly:

  • 3408 Engine Machine (48W) Fuel System And Governor 6N1676 GOVERNOR AND FUEL INJECTION PUMP GROUP (Separate Illustration)

    6N1676 GOVERNOR AND FUEL INJECTION PUMP GROUP Engine Serial No. 48W1 to 48W1195 inclusive 4N1894 Governor, 9S3423 Spring, 7N2520 and 4N1101 Pump parts are shown on Pages 55, 56, 57, 61, 62, 63 and 64


The above list means 7N2520 FUEL INJECTION PUMP GROUP suitable for these model / assembly, items are listed in the reference list according to the parts EPC , any issue please contact our online tech-support.
WhatsApp
wechat
Email
Skype
X
Telegram